Skip to main content
New laboratory accounts: 10% off your first order with code

Analytical methods

HPLC vs Mass Spectrometry: Peptide Testing Compared | Bio Mech

Reverse-phase HPLC and electrospray mass spectrometry are the two analytical methods every credible research-peptide COA depends on. HPLC measures purity; mass spectrometry confirms identity. Neither replaces the other, and a COA that uses only one is incomplete. This guide explains what each method measures, how the two complement each other, and how to read both panels on a Bio Mech batch report.

Search COA reports

Why some reports show different names: Bio Mech works with multiple suppliers who dispatch directly. The original report's client or “tested for” field identifies the commissioning party where recorded, not necessarily the manufacturer or fulfilment supplier. Amino Club's reports remain attributed to AminosClub.com, not to Bio Mech. Check the batch number on a report, and ask us on WhatsApp which batch matches your order. A saved report does not automatically verify current Bio Mech stock; supplier and production lot must both be confirmed.

Product

BMP-2 TZ 10 mg

Reported result

99.90%

Batch
TZ20003
Method
HPLC
Lab
ILS Laboratories, San Diego, CA
Date
22 Oct 2026
Tested for (original report)
AminosClub.com

Product

BMP-1 SM 10 mg

Reported result

99.90%

Batch
SEM0002
Method
HPLC
Lab
ILS Laboratories, San Diego, CA
Date
22 Oct 2026
Tested for (original report)
AminosClub.com

Product

BMP-3 RT 10 mg

Reported result

99.92%

Batch
RT0004
Method
HPLC
Lab
ILS Laboratories, San Diego, CA
Date
21 Aug 2026
Tested for (original report)
AminosClub.com

Product

Endotoxin Analysis (LAL)

Reported result

1.991 EU/vial — within pharmacopoeial limits

Batch
Safety Panel
Method
Immunoassay
Lab
Janoshik Analytical
Date
9 Apr 2026
Commissioning client (original report)
Organisation not verified — consult the original client field
View COA

Product

Heavy Metals (As / Cd / Pb / Hg)

Reported result

As, Cd, Pb, Hg — not detected

Batch
Safety Panel
Method
Mass Spectrometry
Lab
Janoshik Analytical
Date
8 Apr 2026
Commissioning client (original report)
Organisation not verified — consult the original client field
View COA

Product

Glow70 (TB-500 / BPC-157 / GHK-Cu) Blend

Reported result

GHK-Cu 62.95 mg · BPC-157 11.24 mg · TB-500 10.91 mg

Batch
GLOW-2026-01
Method
HPLC + MS
Lab
Janoshik Analytical
Date
2 Feb 2026
Commissioning client (original report)
Organisation not verified — consult the original client field
Batch report reference

Showing 6 of 47 reports. See all COA reports

Reading this research reference

The information below concerns the research subject, not proof of the identity or performance of a supplied material. Check the original sources and your laboratory’s requirements; product documentation must be assessed separately for the exact batch.

What HPLC measures

Reverse-phase HPLC (RP-HPLC) separates a peptide sample by passing it through a non-polar stationary phase under a gradient of increasingly organic mobile phase. Different molecules elute at different times based on their hydrophobicity, and the detector (typically UV absorbance at 214–220 nm) records the area under each peak. The main peak is the target peptide; smaller peaks are related impurities.

The output is a chromatogram with peaks expressed as a percentage of total integrated peak area. Main-peak purity is the headline number on every credible peptide COA, and the related-impurities profile is the supporting detail.

What HPLC does NOT measure

HPLC measures separation, not identity. Two molecules that elute at the same retention time are quantified as a single peak, even if they are chemically different. A peptide of the wrong sequence but the right hydrophobicity can show as a single clean main peak on HPLC alone — which is why HPLC on its own is not sufficient identity confirmation.

HPLC is also blind to the molecular weight of the eluted peak. A truncated sequence missing a single amino acid can elute close enough to the target peptide to integrate into the same main peak; only mass spectrometry will catch that.

What mass spectrometry measures

Electrospray mass spectrometry (ESI-MS) ionises the sample and measures the mass-to-charge ratio of the resulting ions. For a peptide, the output is the molecular weight of the molecule — which can then be compared to the theoretical molecular weight calculated from the sequence.

A match within instrument tolerance (typically a fraction of one Dalton for a peptide in the 1–5 kDa range) confirms that the analysed peak is in fact the compound named on the label. A mismatch means the batch is not what the label says it is — the single most serious COA flag.

What mass spectrometry does NOT measure

Mass spectrometry confirms identity, not purity. A clean MS spectrum at the correct molecular weight does not mean the rest of the sample is also at the correct molecular weight — it means the detected ions, in the part of the spectrum the instrument was looking at, match.

Mass spectrometry is also blind to stereochemistry. Two peptides with the same composition but different chirality at one or more residues will have the same molecular weight; only orthogonal methods (circular dichroism, NMR, chiral HPLC) will distinguish them. For most research-grade peptide work this is not a practical concern, but it is worth knowing.

Why the two are paired on every credible COA

HPLC tells you how clean the batch is. Mass spectrometry tells you whether the clean fraction is what the label says it is. Together they answer the two questions a research-peptide buyer most needs answered: is this the right molecule, and is it pure enough for the protocol?

A COA that includes only HPLC could be reporting a clean batch of the wrong compound. A COA that includes only mass spectrometry could be confirming the right compound in an impure batch. Careful buyers check both: HPLC main-peak purity AND a mass-spectrometry molecular weight matching the theoretical value within tolerance.

Reading the HPLC panel on a COA

The HPLC panel shows the chromatogram (retention time on the x-axis, absorbance on the y-axis), the integration table listing each peak with its retention time and percentage area, and the main-peak purity headline number. Look for: a single dominant peak with retention time matching the published method for the compound, related impurities reported as a percentage of total area, and a main-peak purity at or above the release specification.

Methodologically, a 30-minute gradient on a C18 column with UV detection at 214 nm is the standard reverse-phase setup for peptide analysis. Janoshik Analytical publishes its method parameters and they are consistent across Bio Mech's batch history.

Reading the mass-spectrometry panel on a COA

The mass-spectrometry panel shows the ESI spectrum (mass-to-charge on the x-axis, intensity on the y-axis), the deconvoluted molecular weight, the theoretical molecular weight calculated from the sequence, and the difference between the two. For a peptide in the 1–5 kDa range, an agreement within a fraction of one Dalton is the expected tolerance.

For peptides with modifications (e.g. tesamorelin's trans-3-hexenoyl group, fatty-acid acylated analogues), the panel should explicitly confirm the modification — the molecular weight should match the modified sequence, not the base sequence. A panel that reports only the base-sequence weight on a modified peptide is an incomplete identity confirmation.

When orthogonal methods are added

For most research-peptide batches, HPLC and ESI-MS are sufficient. For complex modifications, isomeric analogues, or batches destined for a particularly sensitive protocol, Bio Mech adds orthogonal methods on request: tandem MS/MS for sequence confirmation, Karl Fischer titration for water content, circular dichroism for secondary-structure confirmation, or chiral HPLC for stereochemistry.

Add-on analytical work is arranged through the consultations team and the extended COA is delivered alongside the standard Janoshik report.

Delivery pages: USA & UK

US states

UK cities

See every delivery location →

Frequently asked questions

What is the difference between HPLC and mass spectrometry?+

HPLC measures purity by separating the sample by hydrophobicity. Mass spectrometry measures identity by measuring the molecular weight of the analysed peak.

Is HPLC on its own enough?+

No. HPLC measures separation, not identity. A peptide of the wrong sequence with the right hydrophobicity can show as a single clean main peak on HPLC alone.

Is mass spectrometry on its own enough?+

No. Mass spectrometry confirms identity, not purity. A clean MS spectrum at the correct molecular weight does not mean the rest of the sample is also at the correct molecular weight.

What should a complete COA include?+

Both an HPLC main-peak purity result AND a mass-spectrometry molecular weight matching the theoretical value within instrument tolerance.

What MS tolerance is acceptable for a peptide?+

A fraction of one Dalton for a peptide in the 1–5 kDa range — the exact tolerance depends on the instrument and the calibration.

What about modified peptides like tesamorelin?+

The mass-spectrometry panel must explicitly confirm the modification — the molecular weight should match the modified sequence, not the base sequence.

What is the standard HPLC method for peptides?+

A 30-minute reverse-phase gradient on a C18 column with UV detection at 214 nm is the standard setup. Janoshik Analytical publishes its method parameters.

Can I request orthogonal analytical work?+

Yes — tandem MS/MS, Karl Fischer, circular dichroism and chiral HPLC are available on request through the consultations team.

Share

Recommended next — verify deeper

Hand-picked links our research customers most often open after this page.

Continue your research

Order in 3 steps · tracked delivery

Order research peptides for your laboratory

Published laboratory reports can be opened in the COA library; confirm the compound and production lot for your order. Dispatch is tracked; normally allow 5–11 business days from when we issue tracking (Brazil up to 25; Kuwait up to 14). For in-vitro research only.

  1. 1

    Choose your compound

    Browse the catalog or search for a specific reference standard.

  2. 2

    Checkout in 2 minutes

    Bank transfer or card — the full price is shown before you pay.

  3. 3

    Tracked dispatch

    Tracking on every order; 5–11 business days from issuing tracking; Brazil up to 25, Kuwait up to 14.

Most ordered this month

BPC-157

From €319.00

Ipamorelin

From €299.00

Bacteriostatic Water

From €179.00

  • Research use only — not for human consumption
  • Tracked delivery to the USA, UK, Europe and the Middle East
  • Batch documentation available on request

Your research order

Find your product. Review every detail.

Compare listed sizes and prices, make your own selection, then review your order before paying. Laboratory research only; not for human consumption.

Choose your own items
Nothing added automatically

Card or bank transfer
Total shown before payment

Tracked delivery
5–11 working days from active tracking