Mitochondrial-targeted research peptide
SS-31 Elamipretide | Cardiolipin Research Peptide | Bio Mech
SS-31 (also known as Elamipretide and MTP-131) is a four-residue mitochondrial-targeted research peptide that selectively binds cardiolipin at the inner mitochondrial membrane. This guide covers what SS-31 is, how Bio Mech Peptides verifies every batch, and how laboratory researchers source SS-31 reliably across Spain, the UK, Europe and the USA.
Reading this research reference
The information below concerns the research subject, not proof of the identity or performance of a supplied material. Check the original sources and your laboratory’s requirements; product documentation must be assessed separately for the exact batch.
What SS-31 is and why it's studied
SS-31 (D-Arg-Dmt-Lys-Phe-NH2) is a synthetic tetrapeptide engineered to accumulate selectively at the inner mitochondrial membrane, where it binds cardiolipin and stabilises supercomplex assembly. Published preclinical work has explored SS-31 in cardiac ischaemia–reperfusion models, age-related mitochondrial dysfunction panels, and renal and skeletal-muscle bioenergetic studies.
Because the peptide carries a Dmt (dimethyl-tyrosine) residue and a D-arginine, SS-31 is significantly more synthetically demanding than standard L-amino-acid peptides — which is why batch testing and supplier selection matter even more than usual.
How Bio Mech verifies every SS-31 batch
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
Janoshik Analytical is the default verification partner for SS-31, with secondary verification on selected batches through additional European laboratories. Per-batch reports are published on the lab reports page and tied to the batch number printed on every vial cap.
Storage, reconstitution and laboratory handling
Lyophilised SS-31 is supplied as a sterile white powder under inert atmosphere. Hold unopened vials at 2–8 °C; transfer to −20 °C if reconstitution will not happen within 8–12 months. Reconstitute with bacteriostatic water for a two-month (60-day) in-use stability window under refrigeration; protect from prolonged light exposure to preserve the Dmt residue.
Most laboratories work at 1–5 mg/ml stock concentrations. SS-31 is sensitive to repeat freeze–thaw cycles — aliquot the full reconstituted volume before any freeze to preserve potency across multi-week protocols.
Buying SS-31 in Spain and across Europe
Verified suppliers dispatch SS-31 from verified suppliers who ship directly with 5–11 day tracked delivery and 5–11 day Spain-wide tracked coverage.
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
Buying SS-31 in the UK
UK research clients receive SS-31 via tracked dispatch from verified suppliers who ship directly, typically arriving in 5–11 days. and VAT and customs handling are quoted transparently at checkout — no surprise charges on delivery.
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
Buying SS-31 in the United States
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
US buyers should confirm institutional research-purchasing policy before ordering. SS-31 is supplied strictly for research use and is not approved for human consumption.
SS-31 vs MOTS-c in mitochondrial research panels
SS-31 and MOTS-c are often studied side-by-side in mitochondrial-bioenergetics panels, but they operate via completely distinct mechanisms. SS-31 binds cardiolipin at the inner mitochondrial membrane, stabilising electron-transport-chain supercomplex assembly. MOTS-c is encoded inside mitochondrial DNA and acts through AMPK-linked metabolic signalling.
Stocking both compounds from the same supplier keeps documentation and packaging consistent across a comparative bioenergetics panel.
Quality signals to demand from an SS-31 supplier
SS-31 contains a Dmt residue and a D-arginine, both of which are easy to substitute with cheaper L-tyrosine and L-arginine analogues by a careless or dishonest supplier. Mass-spec identity confirmation on every batch is non-negotiable — HPLC alone cannot detect that kind of substitution.
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
Frequently asked questions
What is SS-31?+
SS-31 (Elamipretide, MTP-131) is a synthetic tetrapeptide that targets the inner mitochondrial membrane and binds cardiolipin, stabilising electron-transport-chain supercomplex assembly.
Is SS-31 safe for human use?+
Bio Mech SS-31 is supplied strictly for in-vitro and preclinical research. It is not approved for human use in any jurisdiction.
What HPLC purity should I expect?+
Independent laboratory reports are published in the COA library (/coa). They span multiple suppliers and production lots, so a report only counts when its batch number matches the vial in your order — confirm the exact production lot with support before ordering. Ask support about documentation for the exact production lot before ordering.
How is SS-31 reconstituted?+
With bacteriostatic water; refrigerate at 2–8 °C and use within 2 months. Aliquot before any freeze and protect from prolonged light.
Do you ship SS-31 to Spain?+
Yes, with 5–11 day tracked delivery and 5–11 day Spain-wide tracked dispatch.
Do you ship SS-31 to the UK?+
Yes — 5–11 day tracked dispatch with VAT and import handling included transparently at checkout.
Do you ship SS-31 to the USA?+
Yes, with discreet tracked international dispatch in temperature-buffered packaging.
How is SS-31 different from MOTS-c?+
SS-31 binds cardiolipin at the inner mitochondrial membrane; MOTS-c is encoded inside mitochondrial DNA and signals through AMPK-related pathways.
Recommended next
Hand-picked links our research customers most often open after this page.
Continue your research
Order SS-31 on the catalogue
Transparent EUR pricing · tracked dispatch
Browse the full peptide catalogue
research-only vials with batch paperwork available on request
Lab reports & certificates of analysis
Saved reports from multiple suppliers; confirm the actual lot
Book a research consultation
Free 20-minute call with the Bio Mech team
Costa del Sol delivery
Tracked delivery across Marbella & Málaga
SS-31 product page
MOTS-c product page
How to read a peptide COA
Laboratory peptides reference
Storage & reconstitution guide
Reconstitution best practice
Order in 3 steps · tracked delivery
Order research peptides for your laboratory
Published laboratory reports can be opened in the COA library; confirm the compound and production lot for your order. Dispatch is tracked; normally allow 5–11 business days from when we issue tracking (Brazil up to 25; Kuwait up to 14). For in-vitro research only.
- 1
Choose your compound
Browse the catalog or search for a specific reference standard.
- 2
Checkout in 2 minutes
Bank transfer or card — the full price is shown before you pay.
- 3
Tracked dispatch
Tracking on every order; 5–11 business days from issuing tracking; Brazil up to 25, Kuwait up to 14.
Most ordered this month
BPC-157
From €319.00
Ipamorelin
From €299.00
Bacteriostatic Water
From €179.00
- Research use only — not for human consumption
- Tracked delivery to the USA, UK, Europe and the Middle East
- Batch documentation available on request
Your research order
Find your product. Review every detail.
Compare listed sizes and prices, make your own selection, then review your order before paying. Laboratory research only; not for human consumption.
Choose your own items
Nothing added automatically
Card or bank transfer
Total shown before payment
Tracked delivery
5–11 working days from active tracking
